Specific knowledge of the problems and constant research, has brought us to the development of new parts cleaning technology.

Technical Features

Teknox, with its long experience, has studied and currently produces different types of washing systems which are characterized by technical features especially designed to reduce the risks of the personnel employed to a minimum and particularly, conforming to the regulations of the basic product standard (paragraph 5.3 e 5.3.2) and of regulation No. EN 563, regarding thermal and contact hazards.

Therefore, in conformity with the above Regulations, the machines currently in production are divided into two categories:

• LT (Low Temperature): for washing temperatures up to 60°C
• HT (High Temperature): for washing temperatures up to 80°C. Equipped with all necessary options to guarantee the safety of the personnel working at these temperatures.

All our systems are distingushed by their advanced and strict corrispondence to the machine directive and to the safety rules.

CE legislation

Systems for hot washing of motors and mechanical parts using water and biodegradable alkaline detergents

• Built and certified to CE mark requirements and product standards.
• Complies with European safety standards.
• Covered by international patents.

The quality with calibrated washing

• Tunnel washing systems: Tests executed by certified laboratories have given results of a certified quality according with the UNI 4406 Norm, with maximum quantity of residuals < 0,1 mg.
• Robojet washing systems: Tests executed by certified laboratories have given results of a certified quality 14/12, according with the UNI 4406 Norm, with maximum quantity of residuals: < 2,1 mg.

Studies, Projects and the fulfillment of your needs

Each project is studied in detail in the Research Centre, starting with total respect of the current security regulations. It is then carried out with maximum care, choosing the best components and is finally demonstrated and tested by qualified staff. Each system is studied and constructed starting from tested and personalized basic modules according to specific needs.

The inovation at your service

Some of the bases on which our innovations are founded are: the reduction of consumptions, the reduction of emissions in the atmosphere, the systems of active and passive security for the operators, the use of stainless steel, the continuous filtration procedure in baths, the exclusive intention of using specific water-based detergents and the high level of selective separation of contaminants.

Patents

Numerous are the national and international patents obtained following constant research for solutions capable of improving and economizing the processes. Over time, we have acquired the technology for the recovery of the washing liquid, and now, for special applications, models which do not need any liquid are already available. This is an additional improvement characterized by respect for the environmental.

06/04/1992 N. 00227836
06/04/1992 N. 00227837
20/08/1997 N. 01294170
21/08/1997 N. BO974000515
06/08/1998 N. 98830486.1 EU
18/12/1998 N. 6,228,180 B1 US
18/02/1999 N. 99830084.2 EU

Dgt

Dgt units are equipped with a new control system specifically conceived to improve and increase performances.

Slow Rotation

Systems with a rotating basket for processes at the edge of the operating machine suitable for parts of small and medium dimensions.

Thermal insulation

Easy-to-replace insulating panels to reduce the thermal dispersion of the baths.

High pressure

Special high pressure pump, from 6 to 10 bar, to satisfly the most strict test needs.

Bag filter

Special filters which guarantee filtering up to 5 μ.

Top condenser

Exclusive steam condenser.

Vertical pump

Vertical pump, traditional Teknox, with long lasting stainless steel impellers and low maintenance.

Dialysis system

Filtering system with second pump and second bag filter (in dialysis).

Filter system Szd

Special models with mud decantation.

Load/unload station

Loading/unloading station.