Rotating basket metal parts washer with liquid decantation system

A range of machines for automatically washing small and medium sized parts.
Excellent quality cleaning is achieved through the slow rotation of the basket and special washing nozzles.
The PLC enables the treatment to be customized

  Washing capacity ( Ø x H ) Basket load capacity Tank
80 Ø 78 x H 54 cm 100 Kg 240 lt
100 Ø 98 x H 54 cm 200 Kg 240 lt
120 Ø 117 x H 70 cm 300 Kg 300 lt
  • Maximum temperature setting 60°C
  • Maximum temperature setting 80°C
supply voltage
400V 3 PH 50 HZ


UNIX SZD parts washers are washing machines for small and medium-size parts.
The washing process can be fully customized thanks to an intuitive software ensuring washing, blowing and drying thanks to the accessories installed.
This model features are the rear tank, physically separated from the washing chamber.
An additional filtering through cap filters and a very big tank ensure a longer washing time and an easy maintenance.
UNIX SZD parts washers are equipped with standard steam extraction to avoid operators being damaged from an excessive quantity of steam.

What is included in each UNIX SZD
  • Electric timed steam extraction
  • Stretched tin-plate basket with external edge in Stainless steel AISI 304
  • Tank liquid maximum level control and solenoid valve for automatic water intake
  • Minimum level control
  • Colour 4'' touchscreen display for settings and programs.
  • Electric pumps in stainless steel AISI 304 with special gaskets
  • Box filter with 6 cap filters in Stainless steel AISI 304 for pre-filtering the liquid returning to the tank
  • Filter in stainless steel AISI 304 on the pump suction
  • Safety limit switch on the cover opening
  • Tank edge gasket
  • IP 65 electric system with PLC touchscreen (DGT V4)
  • Weekly programming for the activation of heating and oil separator (if installed)
  • Tank accessible from the outside of the cabinet with sludge settling partitions
  • Structure and plates in STAINLESS steel AISI 304
  • Stainless steel AISI 304 washing pipes with laser perforated nozzles

What is included in HT version
  • Tank thermal insulation with panels in Stainless steel AISI 430
  • Safety limit switch with cover opening lock during the cycle
What can be added as an accessory
  • Pneumatic opening and closing of the cover with safety control
  • Hot air drying with side channel blower and resistors
  • External trolley in Stainless steel AISI 304
  • Thermal insulation of bag filter
  • Thermal insulation of parallel mounted duplex bag filter
  • Centrifugal steam condenser
  • Disc oil separator with gear motor
  • Double piping greater than half the height, can be excluded
  • Automatic liquid detergent dispenser
  • Fein mesh box filter
  • Duplex bag filter mounted in parallel on the pump delivery pipe in Stainless steel
  • Bag filter mounted on the pump delivery pipe in Stainless steel
  • Teflon and Viton gaskets
  • Manual washing and blowing with hoses and washing nozzle
  • PLC Siemens S1200 - HMI touchscreen Siemens KTP700
  • High pressure washing pump
  • Tank emptying pump
  • Compressed air blowing and independent pipes

Information Request