Metal cleaning machines INDUSTRY SECTOR Metal cleaning systems
Rotating basket metal parts washer with two or more stages of treatment
A range of machines for automatically washing small and medium sized parts.
Excellent quality cleaning is achieved through the slow rotation of the basket and special washing nozzles.
The two tanks with dedicated pumps enable washing and rinsing to be carried out automatically.
The PLC enables the treatment to be customized.
|Washing capacity ( Ø x H )||Basket load capacity||Tank|
|80||Ø 78 x H 54 cm||100 kg||240 lt|
|100||Ø 98 x H 54 cm||200 Kg||270 lt|
|120||Ø 117 x H 70 cm||300 Kg||350 lt|
- Maximum temperature setting 60°C
- Maximum temperature setting 80°C
UNIX 2B parts washers are suitable for small and medium-sized parts.
The washing cycle, the machine parameters and the process settings can be wholly changed through an intuitive software installed on the touchscreen of the switchboard.
The model features are: two tanks completely separated and independent and each of them equipped with a pump and independent pipes.
A double tank makes possible to join washing and rinsing in the same washer, and a hot-air blowing and drying of parts thanks to the available accessories.
UNIX 2B parts washers are equipped with standard steam extraction to prevent operators from being damaged due to an excessive quantity of steam at the cover opening.
- Electric timed steam extraction
- Stretched tin-plate basket with external edge in Stainless steel AISI 304
- Tank liquid maximum level control and solenoid valve for automatic water intake
- Minimum level control
- Colour 4'' touchscreen display for settings and programs.
- Electric pump in stainless steel with special gaskets
- Box filter with 6 cap filters in Stainless steel AISI 304 for pre-filtering the liquid returning to the tank
- Filter in stainless steel AISI 304 on the pump suction
- Safety limit switch on the cover opening
- Tank edge gasket
- IP 65 electric system with PLC touchscreen (DGT V4)
- Weekly programming for the activation of heating and oil separator (if installed)
- Liquid heating with electric resistor in stainless steel
- Structure and plates in STAINLESS steel AISI 304
- Stainless steel AISI 304 washing pipes with laser perforated nozzles
- Tank thermal insulation with panels in Stainless steel AISI 430
- Safety limit switch with cover opening lock during the cycle
- Pneumatic opening and closing of the cover with safety control
- Hot air drying with side channel blower and resistors
- External trolley in Stainless steel AISI 304
- Thermal insulation of bag filter
- Thermal insulation of parallel mounted duplex bag filter
- Centrifugal steam condenser
- Disc oil separator with gear motor
- Double piping greater than half the height, can be excluded
- Automatic liquid detergent dispenser
- Fein mesh box filter
- Duplex bag filter mounted in parallel on the pump delivery pipe in Stainless steel
- Bag filter mounted on the pump delivery pipe in Stainless steel
- Teflon and Viton gaskets
- Manual washing and blowing with hoses and washing nozzle
- PLC Siemens S1200 - HMI touchscreen Siemens KTP700
- High pressure washing pump
- Tank emptying pump
- Compressed air blowing and independent pipes