models
  Washing capacity ( Ø x H ) Basket load capacity Tank
80 Ø 78 x H 54 cm 100 kg 240 lt
100 Ø 98 x H 54 cm 200 Kg 270 lt
120 Ø 117 x H 70 cm 300 Kg 350 lt
UNIX 2B

Rotating basket metal parts washer with two or more stages of treatment

Unix is a system ideal for the automatic washing of small and medium size mechanical parts.

Washing is carried out by the action of upper, lower and side nozzles. The slow rotation of the basket is ensured by a gear motor. A PLC management enables numberless customisations thanks to a wide range of accessories.
In this configuration, parts washers have two separate tanks and carry out both washing and rinsing.

version
  • LT (heating up to 60° C)
  • HT (heating up to 80° C)
Controls
  • PLC with color Touch Screen
  • Industry 4.0 option
Tank quantity
  • Double tank
Areas of application
  • Mechanical engineering, chip removal, foundries, moulding
  • Surface treatment, pre-painting, paint stripping
  • Aeronautical / Space Industry
  • Electronic
  • Chemical, Pharmaceutical, Medical, Cosmetic, Food
supply voltage
400V 3 PH 50 HZ

UNIX 2B parts washers are suitable for small and medium-sized parts.
The washing cycle, the machine parameters and the process settings can be wholly changed through an intuitive software installed on the touchscreen of the switchboard.
The model features are: two tanks completely separated and independent and each of them equipped with a pump and independent pipes.
A double tank makes possible to join washing and rinsing in the same washer, and a hot-air blowing and drying of parts thanks to the available accessories.
UNIX 2B parts washers are equipped with standard steam extraction to prevent operators from being damaged due to an excessive quantity of steam at the cover opening.

What is included in each UNIX 2B
  • Timed electric exhaustion of steam
  • Hatch closure assisted with gas springs and fastening hook
  • Siemens® electric power parts
  • 4” color touchscreen display for settings and programs
  • Box filter made up of 6 Aisi 304 SS vertical filters for pre-filtration of the liquid flowing back into the tank
  • Aisi 304 stainless steel filter in pump intake
  • Tank border gasket
  • Structure and sheet metal in contact with liquid in Aisi 304 stainless steel
  • Minimum level switch
  • Safety limit switch on cover opening
  • Aisi 304 stainless steel electric pump with special seals
  • Weekly programming to start heating and deoiler (if installed)
  • IP65 electrical system, management via PLC touchscreen (DGT V4)
  • Heating of the liquid with stainless steel electric heating element
  • Mechanical rotation of basket via gearmotor
  • Internal welding bleaching
  • Tanks accessible from the outside
  • Stainless steel bottom section load-bearing structure
  • Aisi 304 stainless steel washing pipelines with professional stainless steel flat nozzles
  • Drain valves for emptying tanks
  • Manual water filling valve

HT VERSION

  • Heat insulation with Aisi 430 stainless steel panels
  • Safety limit switch with cover opening lock during cycles
  • Panels under basket with grease and solids collection sump filters
What can be added as an accessory
  • Maximum liquid level control
  • Compressed air blowing
  • Hot air drying with resistor and air blade side channel blower
  • Demineralizer with mixed resins and conductivity meter
  • Pneumatic cover opening and closing with two-hand safety control unit
  • Centrifugal steam condenser S mobile version
  • Two-hands control for basket rotation with opened lid
  • Stainless steel Aisi 304 external trolley with drops-catcher, wheels and safety brakes [C]
  • Additional basket/platform in stainless steel
  • Stainless steel Aisi 304 additional external trolley
  • Automatic liquid detergent dispenser
  • Disc oil separator with dedicated motorization
  • External pneumatic oil separator
  • Bag filter in stainless steel
  • Magnetic spark plug for bag filter for ferrite powder
  • Idle lower rotating group in stainless steel
  • Idle upper rotating group in stainless steel [C]
  • Device for remote connection and remote support for HMI Weintek
  • Kit for Industry 4.0 for HMI Weintek
  • Manual washing and blowing with hoses and washing nozzle
  • 80 bar manual washing and blowing with hoses and washing nozzle (both for LT or for HT available)
  • Kit for use with abrasive contaminants in the washing liquid
  • Stainless steel fittings and valves kit ( for parts that are in contact with liquids)
  • PLC Siemens® S7 1200 - HMI touchscreen Weintek
  • High pressure washing pump
  • High pressure rinsing pump
  • Circulating pump from tank 2 (most clean) to tank 1 (most contaminated)
  • Stainless steel Aisi 304 retention tank with drip-catcher
  • Upper ramp fastened to the cover
  • Rinsing by water supply and direct drain outlet
  • Nebulized rinse from water mains, draining into the washing tank
  • Tanks emptying pump (2)
  • Signal tower for indicating system status
  • Pipes with blade-nozzle in stainless steel 1/8"
  • Workpieces positioning /clamping pallet

ACCESSORIES NOTES LEGEND
C: the useful washing height is reduced by 130 mm


Information Request